Resuelto Moto G35 5G XT2433-3 FRP RESET REALIZADO SIN RIESGO DE MUERTE

Required Files & Tools

Download Contents
For Flashing Software Fix https://download.lenovo.com/lsa/Releases/Software_Fix_v7.2.3.13_setup.exe
Moto G35 5G XT2433 FRP File
Important Note (Before Starting FRP Process):
First, download the required files using the software provided by Software Fix.
If you face any issues, make sure to follow their instructions step-by-step.
To download the correct file:
Boot the phone into Fastboot Mode.
Copy the IMEI number shown in Fastboot Mode.
Paste the IMEI into the Software Fix tool to download the exact matching file for your device.

Step-by-Step Instructions:

Step 1: Set Up Your PC
Install SPD USB drivers (search: “SPD Unisoc USB driver install”).
If drivers don’t install, disable Driver Signature Enforcement (Google this if unsure).
Step 2: Extract and Open Tools
Unzip the FRP Tool Package.
Open ResearchDownload Tool.
Load the .pac file ( Click the gear icon and select it ).
Step 3: Select Only Required Files
Click on Settings (the two gears icon).
Uncheck everything.
Only check:
FDL1
FDL2
persist
Click OK to confirm.
Step 4: Prepare Your Phone
Power off the phone completely.
Remove the back cover.
Locate the Test Point on the motherboard
Step 5: Connect via Test Point
Use tweezers to short the test point to ground.
While holding it, plug the USB cable into the PC.
The phone will enter diag mode.
Step 6: Start Flashing
In ResearchDownload Tool, click the Play button (Start).
Wait for the flashing to complete.
You’ll see “Passed” or a green check.
Step 7: Final Step
Disconnect the phone.
Power it on.
FRP lock is gone — no more Google account screen.
In Case of Boot Warning:
If your device shows a message like: